Digital Tensile Testing Machine

Get a Price/Quote

MOQ : 1 Unit

Digital Tensile Testing Machine Specification

Voltage
240 Volt (v)

Application
Industrial

Operate Method
Manual

Color
White + Blue

Usage
Tensile Test

Power Supply
3 Phase, 415Volts, 50Hz AC

Material
Iron

Test Speed
5 to 300 mm/min

Control Mode
Semi Automatic

Digital Tensile Testing Machine Trade Information

Minimum Order Quantity
1 Unit

Supply Ability
10 Units Per Month

Delivery Time
8 Week

About Digital Tensile Testing Machine

Feature:

Full fledged sealed membrane alpha numeric keyboard for data entry 16 x 2 Lines LCD Graphics display with backlit for displaying Load and Elongation of crosshead with bigger font size.
Load indicated with resolution of 0.01% of machine capacity for entire range.
Elongation is measured with resolution of 0.01 mm.
Auto detection of overload and over travel and specimen break. On detection of any condition electrical motor is automatically turned off.
Tare load and Reset Elongation facility to display Peak Load and Elongation at Peak, Load at break, Elongation at break
RS232C interface for computer connectivity

Technical Specification

Max. Capacity	2500N	5000N	10 kN	25kN	50 kN
Measuring range	0-2500N	0-5000N	0-10kN	0-25kN	0-50kN
Ranges least	0.125 N	0.25N	0.5 N	1.25N	2.5N
Counts
Elongation scale l.c.	0.01 mm	0.01mm	0.01 mm	0.01mm	0.01mm
Grip separation without grip :min Max	25mm 750mm	25 mm 60mm
Variable speed	5 to 300 mm/min
Drive step less variation
H.p. (for standard speed)	1 Hp	2hp
Supply	3 Phase, 415Volts, 50Hz AC
Over travel safety	Provided with each model

Software features :

menu driven form system with colour graphs to compare sample test results.
test details and reports are stored in database
user programmable master test templates
user can select test from master test templates and can start similar test
load and elongation is continuously displayed on screen
overload protection for machine by electronic control
tare load and reset elongation facility available
user selectable sample break detect condition
load rate and strain rate are also displayed while testing
unlimited load rate and strain rate control steps
with load rate controller, user can hold the load on specimen for unlimited time
with load rate control, user can specify positive or negative rate of loading
user selectable units for load and displacement (kg, kn,n, ibf, mm, cm, inch etc.) Results and
Graphs are automatically displayed accordingly.
on line display of load and displacement (stress, extension, strain) etc. while test is conducted
provision of auto zeroing of elongation at preload set by user
user programmable reports. User can select header, footer, specimen information,
Dimensions, test information, test results, stastical analysis as per his need.
generated reports can be exported to pdf file and can be e-mailed
if electronic extensometer is used then proof stress values from 0.1% to1%can be determined
software will give alert to user to remove extensometer when load crosses .2% of gauge length
Selected then proof load value is calculated. (with extensometer)
separate graph of extensometer and encoder is displayed
provision of calculation of load and elongation at yield, peak load and load at break, yield
Stress, ultimate stress etc.
special software for tensile, compression, bend, tor steel and other test software as per
Customer requirements.